The entire pump is built with stainless steel, right from body to the impeller and shaft, making it light and resistant to corrosion. This pump is sealed mechanically from both inside and outside, preventing electrical and water leakage during its operation and enhancing life of the pump. Positioning the suction at the bottom edge of the pump facilitates removal of water, right up to the bottom level.
Features |
---|
Fully stainless steel pump |
Dual mechanical seal |
Compact design |
Dual ball bearing |
PP insulation |
Applications |
---|
Small and heavy duty dewatering applications in |
Basements |
Construction sites |
Mines, pits and quarries |
Narrow coffers |
Specifications |
---|
Head : 5 to 24 meters |
Capacity : 19.5 to 1 LPS |
Power rating : 0.75 kW - 3.7 kW (1 HP - 5 HP) |
Phase : 3 |
RPM : 2750 |
Download |
---|
Product Catalogues |
IOM |
KOS pump is an openwell submersible pump in cast iron construction. It has wide applications in agriculture and domestic segment.
Features |
---|
Pump bearings are water lubricated |
Wet type submersible motor |
Water-cooled and water lubricated |
Applications |
---|
Agriculture |
Irrigation |
Sprinkler Irrigation |
Water supply |
Specifications |
---|
Delivery size up to 100 mm (4") |
Capacity up to 110 m3 /hr |
Head up to 64 m |
Power rating 2.2 kW to 7.5 kW (3 hp to 10 hp) |
Download |
---|
Product Catalogues |
KOS+ M pump is an openwell submersible pump in cast iron construction. It has wide applications in agriculture and domestic segment.
Features |
---|
Designed for underwater applications – No need of priming and foot valve |
Easy installation – Foundation and installation platform for pump house not required |
Can also be used for out of water applications |
Easy installation – Foundation and installation platform for pump house not required |
Can withstand wide voltage fluctuations from 350- 440 Volts |
Water shower arrangement for out of water applications |
Designed to prevent overloading and motor burning |
Dynamically balanced rotating parts to ensure minimum vibrations during running |
Replaceable wearing parts and hence longer life |
Easy maintenance and spares availability |
CED coated wetted components for long life & rust free operation |
More hygienic& potable for drinking water. |
Applications |
---|
Submerged Pump in Fountains, Wells, Sumps and water tanks |
Water supply for domestic use in high rise Apartments, Buildings, and Hotels |
Gardening and sprinklers / Conventional irrigation |
Industries, for clean water handling |
Specifications |
---|
Head 6 to 64 meters |
Capacity 32 to 2.1 LPS |
Power Rating 2.2 kW to 7.5kW (3.0 Hp to 10.0 Hp) |
Download |
---|
Product Catalogues |
IOM |
KOS N pump is an openwell submersible pump in stainless steel motor body construction. It has wide applications in agriculture and domestic segment. Designed for underwater applications with CED coated wetted components for long life and rust free operation.
Features |
---|
Designed for underwater applications: no need for priming and foot valve |
Easy installation - foundation and installation platform not required |
Can withstand wide voltage fluctuations from 160 to 260 Volts |
Non overloading power characteristics: no fear of motor burning out |
Dynamically balanced rotating parts ensure minimum vibrations |
Replaceable wear and tear parts and hence longer life |
Easy maintenance and spares availability: needs only one spanner for maintenance |
CED coated wetted components for long life and rust free operations |
More hygienic operations for drinking water |
Download |
---|
Product Catalogues |
IOM |
Applications |
---|
Water supply for fountains, sumps and water tanks |
Water supply for use in apartments, buildings and hotels |
Gardening and small farm irrigation |
Specifications |
---|
Technical Specifications |
Head : 8 to 38 metres |
Capacity : 11 to 0.4 LPS |
Voltage Range : 160 to 260 V |
Material of Construction (Standard Supply) |
---|
Impeller : Cast Iron |
Delivery Casing : Cast Iron |
Shaft : SS 410 |
Motor Body : SS |
Mounting Casing : Cast Iron |
Cover NDE : Cast Iron |
These pumps are designed for underwater applications and hence no need of priming and foot valve. These are easy to install and can withstand voltage variation from 350-440 volts. These are designed to prevent overloading and motor burning. These pumps find great use in submerged pumps in fountains, wells, sumps, and water links, water supply for domestic use in high rise apartments and in industries for clear water handling. Designed for underwater applications with CED coated wetted components for long life and rust free operation.
Features |
---|
Designed for underwater applications: no need for priming and foot valve |
Easy installation - foundation and installation platform not required |
Can withstand wide voltage fluctuations from 160 to 260 Volts |
Non overloading power characteristics: no fear of motor burning out |
Dynamically balanced rotating parts ensure minimum vibrations |
Replaceable wear and tear parts and hence longer life |
Easy maintenance and spares availability: needs only one spanner for maintenance |
CED coated wetted components for long life and rust free operations |
More hygienic operations for drinking water |
Download |
---|
Product Catalogues |
IOM |
Applications |
---|
Water supply for fountains, sumps and water tanks |
Water supply for use in apartments, buildings and hotels |
Gardening and small farm irrigation |
Specifications |
---|
Technical Specifications |
Head : 8 to 38 metres |
Capacity : 11 to 0.4 LPS |
Power Ratings : 0.37 to 1.5 kW (0.5 to 2.0 HP) |
Voltage Range : 160 to 260 V |
Material of Construction (Standard Supply) |
---|
Impeller : Cast Iron |
Delivery Casing : Cast Iron |
Shaft : SS |
Motor Body : SS |
These pumps are designed for underwater applications so need of priming and foot valve. In addition to this, these pumps can withstand wide voltage fluctuations from 200-440 V. These submerged pumps are widely used in wells, sumps, water – tanks as well as Water for gardening, sprinklers and conventional irrigation
Features |
---|
Designed for underwater applications. No need of priming and foot valve |
Easy installation - foundation and insulation platform or pump house not required |
Can withstand wide voltage fluctuations from 200 - 440 V |
CED coated cast iron components for rust free and longer life |
Applications |
---|
Pumping water from wells, sumps and water-tanks |
SHWater for gardening, sprinklers and conventional irrigation |
Specifications |
---|
Head : 16 to 56 meters |
Capacity : 600 to 3600 LPM |
Head up to 64 m |
Power rating : 2.2 - 18.3 kW |
Voltage range : 200 - 440 V |
Download |
---|
Coming Soon |
These pumps are designed for underwater applications so no need of priming and foot valve. In addition to this, these pumps can withstand wide voltage fluctuations from 200-440 V. These submerged pumps are widely used in wells, sumps, water – tanks as well as Water for gardening, sprinklers and conventional irrigation.
Features |
---|
Designed for underwater applications. No need of priming and foot valve |
Easy installation - foundation and insulation platform or pump house not required |
Can withstand wide voltage fluctuations from 200 - 440 V |
CED coated cast iron components for rust free and longer life |
Applications |
---|
Pumping water from wells, sumps and water-tanks |
Water for gardening, sprinklers and conventional irrigation |
Download |
---|
Coming Soon |
Specifications |
---|
Head : 14 to 139 meters |
Capacity : 120 to 960 lps |
Head up to 64 m |
Power rating : 2.2 - 18.3 kW |
Voltage range : 200 - 440 V |